• Complaints 141 - 160 of 1547
  • Submitted by: ASIT MAITY | Comments: 0
    DEFECTATIVE DEVICE
    Dear Sir/ Madam, We like to have your kind notice that I purchased Aqua Guard water prifier (AQUAGUARD MAGNA HD UV(NXT) dated 17/01/2017.Its horrible that after 3/4 days installation the device was found not working properly, we complain to the local customer care but no fruitful result come out. As...
  • Submitted by: Furdan Ali | Comments: 1
    Product is Damege
    Hair styler is Damage.
  • Submitted by: Horace Robinson | Comments: 0
    Rust on refrigerator
    Our 18 month old Whirlpool stainless steel refrigerator started rusting almost overnight. It is now in the garage and we have a 5 year old LG brand in our kitchen that we bought used. There is not a bit of rust on the LG brand. Whirlpool should replace this defective refrigerator or give us the...
  • Submitted by: Mary Neris | Comments: 0
    Rust on the doors
    Rust on the doors please help as the company will not do anything.
  • Submitted by: Chuck S | Comments: 0
    Not real stainless
    False advertisment again
  • Submitted by: Leah Archibeque | Comments: 0
    Refrigerator
    Rust on my Stainless Steel French door refrigerator after only two years of use. Shame on Whirlpool for cheating the public. They are still selling the same refrigerators. Whirlpool said there is nothing I can do about this. I informed Home Depot but they ae still selling them. One angry customer at...
  • Submitted by: Joshua | Comments: 0
    Maytag
    These dam wash machines are junk bring back pull to start washers back I got 12years out my pull to start these new wash machines are eating money this shits a joke
  • Submitted by: Cheryl Hess | Comments: 2
    rust pitting on inside door of Maytag diswasher
    I recently noticed pitting of rust on the inside door of my Maytag dishwasher. I purchased it from Home Depot about 6 months ago. I would like the door replaced.
  • Submitted by: princessau | Comments: 0
    Shredding and ripping clothes
    I am so disgusted with my Whirlpool Duet washing machine! After putting up with rips and tears in my clothes for over a year, today I finally had it when it detroyed a shirt that I absolutely loved. I know the tub is also leaking. I have always followed the operating manual guidelines, not abused...
  • Submitted by: Mama | Comments: 0
    Noisy and stopped working
    Repair quotes very high with no guarantee
  • Submitted by: Daud Khan | Comments: 1
    not recieved yet
    I have not recieved these yet
  • Submitted by: kenneth | Comments: 0
    not washing well
    This washer is the worst washer I have ever owned. With the combination of low water levels and not having a agitator my clothes come out smelling and dirty. I think I can do a better job in a pail of water. Ive always been a fan of Whirlpool appliances but this is a failure but dont know how to...
  • Submitted by: Mick | Comments: 0
    Defective tub
    Same situation as many others-tub bearing gone out on 3000 series. Purchased in March of 2009. Told by company no warranty on any parts or labor!!!! Cost is as much as new machine. I am done with Maytag!!!!!!!!!!!!!
  • Submitted by: Anand Shetty | Comments: 0
    Rusting
    Rusted doors of my fridge. Sad. Factory Direct still selling this product.
  • Submitted by: Debbie | Comments: 0
    Ripping my clothes
    This stupid washer, is ripping up my clothing, not happy st all
  • Submitted by: Izhan Siddiqui | Comments: 0
    Faulty product
    Hello sir I bought this product but the product turned out to be faulty further that the warranty given on the details on the site is of 1 year but the warranty card that we got along with the product had expired now what should I do even the returning date has passed so is the warranty date please...
  • Submitted by: Cindy Kerr | Comments: 0
    clothes dont get clean
    Having trouble with my washing machine. I read all the complaints about it. I have ALL the same complaints. So I've decided to get rid of the thing. Anyone have any suggestions on a new model or even an old model that works. (maybe not a Maytag)
  • Submitted by: Richard | Comments: 0
    Defective Lid
    I went to a metal worker and had him create two steel "clamps" ____ ____ to place over the separating parts on either side of the lid. So far, working well. !____ ____!
  • Submitted by: Crichele | Comments: 0
    Maytag 3000 series
    I've continually have had issues with this washer saying either SUD, or f21... I had my home warrenty come out and according to them it's the control piece that needs to be replaced?? This is the second time I e called someone to come out.
  • Submitted by: Sherry Sturman | Comments: 0
    Rust spots in one year of ownership
    My whirlpool refrigerator is riddled with rust spots on the doors. I have owned stainless steel appliances for over 15 years this is the first time this has ever happened. Are they not standing by their products?